Ford Escort Torque specs for connecting rod caps

Ford Torque Specs 

The torque specifications are for the Cylinder head bolts, the main bearing, the crankshaft and the big end bearing on a Ford Escort 16V GLI with a Zetec engine.
1997 Ford Escort.

Here you go!!

Accelerator & Kickdown Cable Bracket	69-95 in lb
A/C Compressor Mounting Bracket	30-40 ft lb
Alternator Lower Mounting Bolt	27-38 ft lb
Camshaft Cap	8-10 ft lb
Camshaft Pulley Lock Bolt	36-45 ft lb
Clutch Release Cylinder	12-17 ft lb
Connecting Rod Cap	35-37 ft lb
Crankshaft Pulley Retaining Bolts	109-152 in lb
Crankshaft Pulley Bolt	80-87 ft lb
Crankshaft Pulley Guide Plate	9-13 ft lb
Crankshaft Rear Cover	6-8 ft lb
Cylinder Head	56-60 ft lb
Cylinder Head Cover	43-78 in lb
Distributor Mounting Bolts	14-19 ft lb
Exhaust Flex Pipe To Converter	51-69 ft lb
Engine Coolant Temperature Sensor	52-78 in lb
Engine Lifting Bracket	27-38 ft lb
Engine Mount	49-69 ft lb
Engine Oil Dipstick Bracket	6-8 ft lb
Engine Support Bracket	69-86 ft lb
Engine Vibration Dampener	41-59 ft lb
Exhaust Manifold Heat Shield	6-8 ft lb
Exhaust Manifold Nuts	28-34 ft lb
Exhaust Mounting Flange To Exhaust Manifold	23-34 ft lb
Flexplate Bolts	71-76 ft lb
Flywheel Bolts	71-76 ft lb
Fuel Rail Mounting Bolts	14-19 ft lb
Halfshaft Bearing Support	31-46 ft lb
Idler Mounting Bolt	27-38 ft lb
Intake Plenum & Manifold Assembly To Cylinder Head Nuts	14-19 ft lb
Main Bearing Cap	40-43 ft lb
Oil Jet Bolt	9-13 ft lb
Oil Pan Drain Plug	22-30 ft lb
Oil Pan To Engine Block	6-8 ft lb
Oil Pan To Transaxle	27-38 ft lb
Oil Pressure Switch	9-13 ft lb
Oil Pump	14-19 ft lb
Oil Pump Cover	52-78 in lb
Oil Strainer	6-8 ft lb
Power Steering Pump Bracket	27-38 ft lb
Radiator Mounting Bracket	6-8 ft lb
Seal Plate	6-8 ft lb
Shift Control Rod To Transaxle	12-17 ft lb
Spark Plugs	11-17 ft lb
Starter Motor	27-38 ft lb
Temperature Gauge Sending Unit	56-82 in lb
Thermostat Housing Bolt & Nut	14-19 ft lb
Timing Belt Cover	6-8 ft lb
Timing Belt Inner & Outer Guide Plates	9-13 ft lb
Timing Belt Pulley	80-87 ft lb
Timing Belt Tensioner	27-38 ft lb
Timing Belt Lower Cover	69-95 in lb
Timing Belt Middle Cover	69-95 in lb
Timing Belt Upper Cover	69-95 in lb
Torque Converter Nuts	25-36 ft lb
Transaxle Front Mount	27-38 ft lb
Transaxle To Engine	See note
Transaxle Upper Mount Bolts	32-45 ft lb
Transaxle Upper Mount Nuts	49-69 ft lb
Valve Cover Bolts	43-78 in lb
Water Pump Bolts	14-19 ft lb
Water Pump Inlet Fitting To Water Pump	14-19 ft lb
Water Pump Pulley Bolts	69-95 in lb

Note:
Automatic transaxle: 41 - 59 ft lb.
Manual transaxle: 47 - 66 ft lb.

2000 ford focus

Connecting Rod: Specifications
Connecting Rod Nut
Connecting Rod Cap Nuts
Step 1 ............................................................................................................................................................................................ 35-41 Nm (26-30 lb/ft)
Step 2 ............................................................................................................................................................................................ Back off nuts 2-3 turns
Step 3 ....................................................................................................................................................................... Retighten to 35-41 Nm (26-30 lb/ft)

Ford Engine Bolt Torque Chart

Bolt Torque Spec Chart for Ford Engines

These specs are for stock-type bolts with light engine oil applied to the threads and the underside of the bolt head. Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use after-market performance bolts like ARP’s, you should follow the recommended torque specifications.

260, 289, 302 Torque Spec.

Fastener Type	Torque Spec
Main cap bolts	60-70 ft-lbs
Outer main cap bolts	35-40 ft-lbs.
Connecting rod bolts	(40-45 ft-lbs. for 289 HP & Boss 302)
Cylinder head bolts	65-72 ft-lbs.
Rocker arms	17-23 ft-lbs.
Intake manifold bolts	23-25 ft-lbs
Oil pump bolt	23-28 ft-lbs.
Cam bolts	40-45 ft-lbs.
Cam thrust plate bolts	8-10 ft-lbs.
Harmonic damper bolts	70-90 ft-lbs.
Flywheel / flex-plate bolts	75-85 ft-lbs.
Pressure plate bolts	35 ft-lbs.
Front cover bolts	12-15 ft-lbs.

351W Torque Spec.

Fastener Type	Torque Spec
Main cap bolts	95-105 ft-lbs
Connecting rod bolts	40-45 ft-lbs.
Cylinder head bolts	90-100 ft-lbs.
Rocker arms	17-23 ft-lbs.
Intake manifold bolts	23-25 ft-lbs.
Oil pump bolts	23-28 ft-lbs.
Cam bolts	40-45 ft-lbs.
Cam thrust plate bolts	8-10 ft-lbs.
Harmonic damper bolt	70-90 ft-lbs.
Flywheel / flex-plate bolts	75-85 ft-lbs.
Pressure plate bolts	35 ft-lbs.
Front cover bolts	12-15 ft-lbs.

351C, 351M Torque Spec.

Fastener Type	Torque Spec
Main cap bolts	95-105 ft-lbs.
Connecting rod bolts	40-45 ft-lbs. (45-50 ft-lbs. For Boss 351C)
Cylinder head bolts	105 ft-lbs. (125 ft-lbs. For Boss 351C)
Rocker arms (non-adjustable)	Rocker arms (non-adjustable)
5/16in. intake manifold bolts	21-25 ft-lbs.
3/8in. intake manifold bolts	28-23 ft-lbs
Oil pump bolt	25 ft-lbs.
Cam bolts	40-45 ft-lbs.
Cam thrust plate bolts	9-12 ft-lbs.
Harmonic damper bolt	70-90 ft-lbs.
Flywheel / flex-plate bolts	75-85 ft-lbs.
Pressure plate bolts	35 ft-lbs.
Front cover bolts	12-18 ft-lbs.

360, 390, 406, 427, 428FE Torque Spec.

Fastener Type	Torque Spec
Main cap bolts	95-105 ft-lbs.
Crossbolts for 406-427	40 ft-lbs.
Connecting rod bolts	40-45 ft-lbs. (53-58 ft-lbs. For 406 and 427)
Cylinder head bolts	80-90 ft-lbs. (100-110 ft-lbs. For 1963-67 427)
Rocker arm shaft bolts	40-45 ft-lbs.
Intake manifold bolts	32-35 ft-lbs.
Oil pump bolt	12-15 ft-lbs.
Cam bolts	40-45 ft-lbs.
Harmonic damper bolt	70-90 ft-lbs.
Flywheel / flex-plate bolts	75-85 ft-lbs.
Pressure plate bolts	35 ft-lbs.
Front cover bolts	12-15 ft-lbs.

429-460 Torque Spec.

Fastener Type	Torque Spec
Main cap bolts	95-105 ft-lbs
Connecting rod bolts	40-45 ft-lbs.
Cylinder head bolts	140 ft-lbs.
Rocker arms (non-adjustable)	18-22 ft-lbs.
Intake manifold bolts	25-30 ft-lbs.
Oil pump bolt	25 ft-lbs.
Cam bolts	40-45 ft-lbs.
Harmonic damper bolt	70-90 ft-lbs.
Flywheel / flex-plate bolts	75-85 ft-lbs.
Pressure plate bolts	35 ft-lbs.
Front cover bolts	12-18 ft-lbs.

This will help.

Thanks.