P2767 Code On Dodge
Dodge P2767 Code Transmission In Limp In Mode P2767 trouble code (Torque Conv Clutch Press Ctrl Solenoid Ctrl Circ Range/Perf) is setting. Transmission is in limp in mode. Potential Causes: Lead Frame or Transmission Wiring Tests/Procedures: 1. Check the wiring between the transmission and the transmission control module. Make sure the #2 signal wire is not open, shorted to ground, or shorted to any other circuit. 2. If the wiring checks OK, raise all four wheels off the ground, start the vehicle and place the shifter in drive. While lab scope testing the #2 signal wire, obtain second gear. When the transmission is in second gear, there should be a 5-volt square wave pattern being produced by the #2 sensor. If not, replace the sensor. Help Advise:--- The speed sensors are sold as a complete assembly, which may be called the “lead frame” or possibly the “electrohydraulic control unit.” P2767-Theory of Operation The Input Speed Sensor...