How to Remove & Install a Front Wheel Bearing for a Toyota Corolla
How to Remove & Install a Front Wheel Bearing for a Toyota Corolla A worn wheel bearing can cause excessive stress on suspension components. At the first sign of failure, the wheel hub and bearing assembly should be replaced. On a Toyota Corolla, the assembly is located in the center of the steering knuckle, which must be removed to access the assembly. If you don't have access to a hydraulic press, machine shops can remove the hub and bearing assembly and install the new assembly for a fee. Things You'll Need Automotive jack Jack stands Socket set Wire hanger Marker Hammer Pliers Small hub puller Large standard head screwdriver Wedge-type puller Hydraulic Press Torque wrench Instructions Loosen the hub nut over the drive axle with a socket wrench. The hub nut may be covered by a small cover or hub cap; remove the cover or cap to access the nut. Slide an automotive jack under the front of the car. Pump the handle to raise the jack and lift the car.