How to replace transmission mount on toyota sienna
TOYOTA TRANSMISSION MOUNT REPLACE how to replace a transmission mount on a 03 Toyota sienna The mount just inside the drivers side wheel well. The Procedure starts here: -- There is one 19 mm nut that is visible to see which holds the mount to the aluminium case of the transmission you have to remove this not then on the underside of the subframe remove the plastic plugs to gain access to the 17 mm nuts that hold the bottom side of the mount. This is the easy part the hard part is jacking up the back of the transmission/engine assembly and lowering the subframe down just far enough to separate the distance between the studs and the holding bracket. This will allow you to then tip the mount out and remove it from the subframe. On some models the lower control arm bracket will be in the way in which case you will have to remove the lower control arm. This will help. Thanks.